SJ Single Stage Handwheel gear operators
SJ Single Stage Handwheel gear operators
Connect the bottom flange of the gear operator to the upper flange of the valve and slide the valve shaft into the hole on the worm gear. Tighten the flange bolt. The valve can be closed by turning the hand-wheel clockwise and opened by turning the hand-wheel counterclockwise. On the upper face of the gear operator, a position indicator and a position marking are mounted, through which the position of switch can be directly observed. The gear operator is also equipped with a mechanical limit screw, which can be adjusted and function to limit the position at the switch extreme position.
? Cast iron housing (ductile iron optional)
? Protected steel input shaft (stainless steel optional)
? Cast Iron hand-wheel (150~400)
? IP65 grade protection
? Nickel-plated input shaft, with more resistance to corrosion
? Ductile iron worm gear
? NBR sealing materials
? Suitable for -20℃?~ 120℃?working conditions
? Stroke: 0 - 90° (± 5° adjustable)
? Ductile iron casing
? IP68 grade protection
? Welded hand-wheel (200 or above)
? Aluminum-bronze worm gear
? Stainless steel input shaft
? For high temperature up to 320℃
? For low temperature down to -46℃
? For marine use
? Designed with a lock mechanism
Main Components List?
|
Part Name |
Material |
|
Hand wheel(150~400) |
Cast Iron |
|
Handwheel (over 300mm) |
Carbon structural steel |
|
Input shaft |
Carbon steel |
|
Housing |
Cast Iron |
|
Seals |
Nitrile rubber |
|
Worm |
Carbon steel |
|
Quadrant |
Ductile iron |
|
Cover |
Cast Iron |
|
Indieator |
SUS201 |
Main Technical Parameter
|
Model |
Gear ratio |
Rating input(Nm) |
Rating output(Nm) |
Efficiency(%) |
Hand-wheel |
|
SJ24 |
24:1 |
30 |
170 |
23 |
150 mm |
|
48 |
270 |
300 mm |
|||
|
SJ30 |
30:1 |
90 |
700 |
26 |
300 mm |
|
SJ50 |
50:1 |
95 |
1200 |
25 |
300 mm |
|
SJ80 |
80:1 |
95 |
2000 |
26 |
400 mm |
